Data Communication Transmission Solution

A. Intelligent data transmission

The switchgear has a built-in IP modem. The modem is directly connected to the base station. The IP and port of the central server are set in the modem through the configuration tool. After powering on, the network can communicate with the server without the need to configure additional acquisition equipment, simplifying equipment installation and communication wiring. . It is not limited by distance and can be installed dispersedly. In areas with fewer measurement points, it is ensured that every modem can be connected to the network to achieve remote monitoring and facilitate back-end operation and maintenance personnel to check on-site conditions.

Can be installed separately

It is not limited by the installation distance. As long as there is a signal, remote monitoring can be achieved even if the modem is installed in different areas .

Simple networking

Use wireless GPRS network to transmit data, simplifying the inconvenience of network wiring, and it can be used immediately after powering on the network.

Rich interfaces

It has multiple standard RS232/RS485 serial ports to realize data collection from multiple devices;

B.FTU feeder terminal remote monitoring

Four-Faith's product F3X14-DK has rich interfaces, including RS232 (or RS485) and network ports. The characteristics of supporting wireless communication and industrial-grade design make the application environment of F3X14-DK more diverse. It is very suitable for providing a network environment for FTU, allowing it to communicate with the main station, complete circuit breaker control, and realize the protection of feeders.

Suitable for harsh industrial environments.

It can be used in feeder terminal equipment FTU in remote suburbs and rural areas, or in places with wired environments such as distribution rooms, fully adapting to various power scenarios.

Industrial grade design, high protection level

lUsing metal shell, protection level IP30 , compact and easy to install

Various networking methods

Supports wireless GPRS and wired networks to transmit data, simplifying the inconvenience of network wiring

Remote data monitoring, switch control

Cooperate with SCADA to realize normal monitoring and fault identification of distribution lines, isolation and restoration of power supply to non-faulty sections.

C.E-house solution

E-House monitoring solutions typically involve the use of sensors, communication devices, and software applications to collect and analyze data from the various devices and systems in a project. Four-Faith's protocol gateway has a variety of interface types, including RS232/485, IO port and Ethernet port module E-House connection for various terminals. And through the protocol conversion function and transparent transmission function, different products and different protocols can directly communicate with each other to complete remote data transmission and monitoring functions;

Rich interfaces and various types

Standard RS232/485, IO port and RJ45 port to meet various terminal access and reduce costs

Protocol conversion, various types

lSupports IEC101/104, modbus RTU/TCP, DNP3.0 and other protocols, and can be used on different protocol master stations

4G/5G networking, communication guarantee

Support wireless communication, 4G/5G networking, dual-SIM mode, network communication is guaranteed